Dyra‑Valve™ Horizontal Completion System
Over View
Cementable sleeves for safe, high‑conductivity, non‑explosive horizontal well completions
The Dyra‑Valve™ System is ANVEY’s advanced cementable sleeve technology engineered for modern horizontal wells where safety, precision, and formation protection are essential. Installed as part of the casing or liner and cemented at strategic measured depths, Dyra‑Valves™ eliminate the need for perforating guns and the formation damage associated with shaped‑charge perforations.
Each sleeve contains engineered flow slots manufactured from special alloys with intelligent protective coatings, delivering twice the flow area of conventional wireline or CT perforations. This ensures superior connectivity, reduced skin, and improved long‑term productivity.
Activation is performed using the Uniserve™ tool, deployed on coiled tubing. The tool locates each sleeve using a casing‑collar locator, anchors inside the Dyra‑Valve™, and uses annulus pressure to shear screws and shift the internal mandrel—cleanly exposing the flow slots. If a sleeve refuses to open, the integrated hydra‑jet system creates perforations instantly, ensuring stimulation or production can proceed without delay.
The Dyra‑Valve™ System is the ideal choice for operators seeking a safer, cleaner, and more efficient alternative to plug‑and‑perf, enabling multi‑stage stimulation with fewer risks, fewer trips, and significantly lower operational complexity.
Right Candidate for Dyra‑Valve™ Horizontal Completions
The Dyra‑Valve™ + Uniserve™ system is the right fit for wells that require:
Well Types
- Long‑reach horizontal wells
- High‑deviation or dog‑legged trajectories
- Multi‑stage stimulation wells
- Wells where perforation guns are risky or restricted
- Wells requiring selective zone control (open/close capability)
- Wells with casing deformation risk
- Wells where annulus‑based fracturing is preferred
Operational Conditions
- Environments where explosives are undesirable or prohibited
- Wells requiring cemented sleeves for zonal integrity
- Completions needing rapid multi‑stage stimulation
- Wells where coiled tubing is already planned
- Situations requiring contingency perforation (hydra‑jet backup)
- Projects targeting lower completion cost and reduced NPT
Reservoir / Formation Conditions
- Fragile formations prone to perforation‑induced compaction
- Tight reservoirs needing maximum flow area
- Zones sensitive to skin damage
- Reservoirs requiring clean, high‑conductivity entry points
- Formations where perforation debris or crushed zone is unacceptable
If a well needs safe, repeatable, non‑explosive, high‑conductivity access to the reservoir, Dyra‑Valve™ is the ideal candidate.
why choose dyra system
A safer, smarter, and more productive alternative to perforating guns
1. Zero explosives — maximum safety
No shaped charges, no explosive logistics, no surface risk.
2. Cementable sleeves for perfect zonal placement
Run with casing/liner and cemented exactly at target depths.
3. High‑conductivity flow paths
4. Formation‑friendly access
No crushed zone, no compaction, no perforation debris.
5. Uniserve™ activation — simple and reliable
Locate → Anchor → Apply annulus pressure → Shear screws → Shift mandrel → Expose slots.
6. Hydra‑jet backup for guaranteed access
If a sleeve doesn’t open, hydra‑jet perforation ensures the stage is still completed.
7. Real‑time zone control
Dyra‑Valves™ can be opened or shut anytime for selective production or stimulation.
8. Lower completion and workover cost
Fewer trips, no guns, no plugs, no debris management.
9. Ideal for horizontal wells
Slim, robust, cementable design for long laterals and high‑deviation sections.